What is a "Coaxial Cable Connectors How To Install"? The Most Authoritative Explanation.

What is a "Coaxial Cable Connectors How To Install"? The Most Authoritative Explanation.

How do you install a coax cable?

A coaxial cable (coax) brings TV and internet signals into homes and other buildings. These cables need connectors on the end to hook up to appliances like TVs and transmit signal. If you have a coax cable without a connector, installing your own is a simple task. Strip the wire and expose its inner conductor.

Which coaxial cable connector should I buy?

The same goes for wall plates. Not all wall plates have built-in coaxial cable connectors capable of handling high-end signals. When in doubt, buy the connector with the highest frequency rating. The rating should be displayed on the packaging.

How do you crimp a coax cable?

Strip the wire and expose its inner conductor. Then push a connector over it and crimp it in place. For tight spaces, use a right-angle connector to avoid bending the cable too much. Determine whether you have an RG59 or RG6 cable. These are the 2 most common types of coax cables, and you probably have one or the other.

How do you tighten a coaxial cable connection?

As with end coaxial cable connectors, the threaded coaxial cable connectors on wall jacks, computers and TVs must provide a solid path for the signal. Most people finger-tighten these connections, but that just isn't good enough. Instead, using a 7/16-in. wrench, turn the nut an extra quarter turn to snug up the connection.

Related Articles